WIRE EDM & EDM HOLE POPPING
At Arbiser Machine, we have some of the fastest Wire EDM machines in the business with our Clean-Cut Technology. Made for speed, our 3R stainless and ground tooling allows us to completely prepare your parts outside of the machine in one of several pre-load stations. The part is set and indicated in, and the code is generated before it ever enters the machine, so no valuable machine-time is wasted which provides you with considerable cost and time savings.
Our Wire EDM machines cut any conductive material from the thickness of tinfoil all the way to 16” thick of hardened A-2 tool steel! We generally run .010” diameter wire brass wire, but other wire diameters we frequently use include .004”, .006” and .008”. Additionally, rigid preventive maintenance and cleaning schedules guarantee clean, efficient machines that yield consistent results without losing speed and accuracy or facing unexpected failures.
JUST ARRIVED for 2011! ...
AgieCharmilles Cut 300
Now 8 EDM machines!
Just Arriving for 2011
This is the latest in precision and speed.
The Cut 300 by AgieCharmilles.
Just Arriving for 2011
This is the latest in precision and speed.
The Cut 300 by AgieCharmilles.
Our Sister Company
Atlanta EDM is our in-house EDM division that specializes in all types of EDM machining, and all under the same roof! This means efficiency and speed when it comes to your machined parts because we have the best of both worlds...traditonal machining and CNC to manufacture the blanks, and the EDM's to perform the electrical discharge machining, and the traditional lathes, mills and grinding to finish the job after the wire work is complete.
Check our our video!
Check our our video!
Sample part, 10" tall.
This part is 10" tall, made of hardened A-2 tool steel. Imagine trying to cut this any other way. If one were to conventially mill the part, and then heat treat it, it would warp and be out of tolerance. We heat treated and made a ground blank, then wired the profile after it was 60Rc so that there would be no
Thin fins, bore & keyway, all in 1 setup.
Our EDM that uses linear motors for motion
Inside one of our EDM's, looking at top/bottom head
Tiny heat sinks
EDM Small Hole Drill (EDM Hole Popping)
Small hole EDM compliments our wire EDM machines by quickly generating starter holes through seemingly impossible-to-drill materials or thicknesses, greatly reducing cost and turnaround time.
We can pop a hole through 13 inches of any kind of steel! The EDM hole popper, (EDM micro drill or EDM small hole drill) allows starter holes to be burned quickly and easily in work pieces of virtually any hardness and with dizzying length to diameter ratios. Small hole EDM diameters range from .006 to .120 inches. We use a coreless electrodes and quickly blast through any metal or carbide regardless of the hardness. Send us your specifications and we will quote your job in 4 hours or les
We can pop a hole through 13 inches of any kind of steel! The EDM hole popper, (EDM micro drill or EDM small hole drill) allows starter holes to be burned quickly and easily in work pieces of virtually any hardness and with dizzying length to diameter ratios. Small hole EDM diameters range from .006 to .120 inches. We use a coreless electrodes and quickly blast through any metal or carbide regardless of the hardness. Send us your specifications and we will quote your job in 4 hours or les
Hole popping diameters:
Our standard electrodes are:
.006
.008
.010
.012"
.016"
.020"
.039"
.060"
.080"
.100"
.118"
.006
.008
.010
.012"
.016"
.020"
.039"
.060"
.080"
.100"
.118"
We have Programmable CNC High Speed EDM Drilling
Programmable CNC High Speed EDM Drill
Have a lot of holes to drill? Manual hole poppers can leave a machinist crosseyed and your part scrapped if not careful, not to mention labor costs to babysit the electrode movement....We don't waste time with manually moving from hole to hole. Our fully programmable CNC Hole popper adds multiple point drilling capacity and automatic wear compensation.
